Edge Autonomy is a proud member of the aviation community in Europe and participates in their innovation programs.

EU REPORTS

Registration Information

Edge Autonomy Riga LTD
VAT Nr. LV40103258664
Reg. Nr. 40103258664

European Regional Development Fund

For Penguin C optimization, VTOL development, and New Generation Gimbal projects

  • EU: Start of project 09.2024 - 08.2025

    Project: Development of Ground Control Software "PenguinBase"

  • EU: Start of project 09.2024 - 08.2025

    Project: Development of Autopilot "IcePilot"

  • EU: Project report 01.07.2024.-30.09.2024.

    Project: Development of a new Gimbal – EPSILON 140 MWIR

  • EU: Project report 01.04.2024 – 30.06.2024

    Project: Development of a new Gimbal – EPSILON 140 MWIR

  • EU: Project report 01.05.2023. – 31.07.2023

    Project: Increasing the competitiveness of vertical take-off and landing aircraft

  • EU: Start of the project 04.2024

    Edge Autonomy started a research and development program for payload prototyping. Program is supported by the European Regional Development Fund.

  • EU: Project report 31.01.2023 – 30.04.2023

    Project: Increasing the competitiveness of vertical take-off and landing aircraft

  • EU: Project report 01.11.2022 – 31.01.2023

    Project: Increasing the competitiveness of vertical take-off and landing aircraft

  • EU: Final MASOC project report Q2 2022

    The 2st quarter final report on research and development program supported by the European Regional Development Fund for Penguin C competitiveness project is available by following the corresponding link. Research Nr. 3.4 report from project Nr. 1.2.1.1/18/A/008: Penguin C competitiveness

  • EU: Micro gimbal project report Q2 2022

    The 2st quarter report on research and development program supported by the European Regional Development Fund for Micro gimbal development project is available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/006: Micro gimbal

  • EU: Project for payload prototyping completed, participation in exhibitions

    UAV Factory finished a research and development program for payload prototyping. Program is supported by the European Regional Development Fund. UAV Factory document UAV Factory participated in UVID 2017 conference and Dubai Airshow 2017. Program is supported by European Regional Development Fund. UAV Factory document

  • EU: Final Micro gimbal project report 2022

    The final report on research and development program supported by the European Regional Development Fund for Micro gimbal development project is available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/006: Micro gimbal

  • EU: Final VTOL project report Q2 2022

    The 2nd quarter final report on research and development program supported by the European Regional Development Fund for VTOL development project is available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/001: VTOL development

  • EU: Project milestone update

    UAV Factory continues a research and development program for an upgraded Penguin platform. Program is supported by the European Regional Development Fund. UAV Factory document

  • EU: Quarterly report 1Q 2021

    The 1st quarter reports on research and development programs supported by the European Regional Development Fund for Penguin C optimization, VTOL development, and New Generation Gimbal projects are available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/001: VTOL development Research Nr. 3.4 report from project Nr. 1.2.1.1/18/A/008: Penguin C competitiveness Research Nr. 3.2 report from project Nr. 1.2.1.1/18/A/008: Penguin C optimization Report from project Nr. 1.2.1.1/18/A/006: New Generation Gimbal development

  • EU: Quarterly report 1Q 2022

    The 1st quarter reports on research and development programs supported by the European Regional Development Fund for Penguin C optimization, VTOL development, and New Generation Gimbal projects are available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/001: VTOL development Research Nr. 3.4 report from project Nr. 1.2.1.1/18/A/008: Penguin C competitiveness Report from project Nr. 1.2.1.1/18/A/006: Micro gimbal

  • EU: Quarterly Report 3Q2020

    3rd quarter reports on research and development programs supported by the European Regional Development Fund on VTOL development and Penguin C optimization are available by following the corresponding links. Report VTOL development (Project completed) Report Penquin C optimization

  • EU: Quarterly Report 4Q2019

    4th quarter reports on research and development programs supported by the European Regional Development Fund on VTOL development, Penguin C optimization and improvement of gyro-stabilized payloads are available by following the corresponding links. Report VTOL development Report Penguin C optimization Report Improvement of gyro-stabilized payloads

  • EU: Quarterly Report 4Q2020

    The 4th quarter reports on research and development programs supported by the European Regional Development Fund for Penguin C optimization, VTOL development, and New Generation Gimbal development projects are available by following the corresponding links. Report. Penquin C optimization Report. VTOL development Report. New Generation Gimbal development

  • EU: Report on program milestones

    UAV Factory continues a number of research and development programs supported by the European Regional Development Fund. Milestone report

  • EU: Start of the program

    UAV Factory started a research and development program for Penguin C UAS improvement. Program is supported by the European Regional Development Fund. UAV Factory document

  • EU: Start of the program, participating in exhibitions

    UAV Factory started a research and development program for payload prototyping. Program is supported by the European Regional Development Fund. UAV Factory document UAV Factory participated in AUVSI 2019 and IDEX 2019 exhibitions. Program is supported by the European Regional Development Fund. UAV Factory document

  • EU: Project milestone update

    UAV Factory continues a research and development program for an upgraded Penguin platform. Program is supported by the European Regional Development Fund. UAV Factory document

  • EU: Start of the project

    UAV Factory started a research and development program for payload prototyping. Program is supported by the European Regional Development Fund. UAV Factory document

  • EU: Start of the project

    UAV Factory started a research and development program for an upgraded Penguin platform. Program is supported by the European Regional Development Fund. UAV Factory document

  • EU: Start of the second phase of the project

    UAV Factory started a second phase in a research and development program for an upgraded Penguin platform. Program is supported by the European Regional Development Fund. UAV Factory document

  • EU: Quarterly Report 1Q2020

    1st quarter reports on research and development programs supported by the European Regional Development Fund on VTOL development Penguin C optimization and improvement of gyro-stabilized payloads are available by following the corresponding links. Report VTOL development Report Penguin C optimization Report Improvement of gyro-stabilized payloads

  • EU: Quarterly Report 2Q2020

    2nd quarter reports on research and development programs supported by European Regional Development Fund on VTOL development and Penguin C optimization are available by following the corresponding links. Report VTOL development Report Penguin C optimization

  • EU: Quarterly report 2Q 2021

    The 2st quarter reports on research and development programs supported by the European Regional Development Fund for Penguin C optimization, VTOL development, and New Generation Gimbal projects are available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/001: VTOL development Research Nr. 3.4 report from project Nr. 1.2.1.1/18/A/008: Penguin C competitiveness Research Nr. 3.2 report from project Nr. 1.2.1.1/18/A/008: Penguin C optimization Report from project Nr. 1.2.1.1/18/A/006: New Generation Gimbal development

  • Quarterly report Q3 2021

    The 3rd quarter reports on research and development programs supported by the European Regional Development Fund for Penguin C optimization, VTOL development, and New Generation Gimbal projects are available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/001: VTOL development Research Nr. 3.4 report from project Nr. 1.2.1.1/18/A/008: Penguin C competitiveness Report from project Nr. 1.2.1.1/18/A/006: New Generation Gimbal development

  • Quarterly report Q4 2021

    The 4th quarter reports on research and development programs supported by the European Regional Development Fund for Penguin C optimization, VTOL development, and New Generation Gimbal projects are available by following the corresponding link. Report from project Nr. 1.2.1.1/18/A/001: VTOL development Research Nr. 3.4 report from project Nr. 1.2.1.1/18/A/008: Penguin C competitiveness Report from project Nr. 1.2.1.1/18/A/006: New Generation Gimbal development

Apply for an Opportunity

Name(Required)
Email(Required)
In which country you are interested to work in?(Required)
Please indicate which position you're applying for:
Drop files here or
Max. file size: 50 MB.
    This field is for validation purposes and should be left unchanged.